Author Index

A

  • Abbasi, S. M. The Effect of Mg on Microstructure and High Temperature Mechanical Properties of Hasteloy X Superalloy [Volume 37, Issue 2, 2018, Pages 29-37]
  • Adeli, M. Investigating the Effect of Ethanol and Ascorbic Acid on Titanium Dioxide Extraction from Ilmenite by Oxalic Acid [Volume 37, Issue 1, 2018, Pages 11-25]
  • Aghaei, A. Fabrication and Characterization of an Optical Nano-hybrid Sol-gel Derived Thin Film on the PMMA Substrate [Volume 37, Issue 4, 2019, Pages 101-112]
  • Akbari, B. Structural and Mechanical Evaluation of Polycaprolactone Scaffold with the Gradient Porous Microstructure for Bone Tissue Engineering [Volume 37, Issue 3, 2018, Pages 75-86]
  • Akbari, Gh. Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying [Volume 37, Issue 1, 2018, Pages 1-9]
  • Akbari Taemeh, M. Structural and Mechanical Evaluation of Polycaprolactone Scaffold with the Gradient Porous Microstructure for Bone Tissue Engineering [Volume 37, Issue 3, 2018, Pages 75-86]
  • Akbarzadeh, M. An Investigation Into the Properties of MoS2-Cr Coatings Produced by DC Magnetron Sputtering [Volume 37, Issue 4, 2019, Pages 25-41]
  • Alizadeh, M. The Effect of Al2O3 Particles Concentration on the Properties of Ni-Mo-Al2O3 Composite Coatings Fabricated by Electrodeposition [Volume 37, Issue 2, 2018, Pages 49-58]
  • Allahkaram, S. R. A Comparative Investigation into Corrosion and Wear Properties of Zn-Ni and Zn-Ni/PTFE Coatings [Volume 37, Issue 3, 2018, Pages 49-62]
  • Amiri, P. First Principeles Initio Study of the Electronic and Optical Properties of Bulk TiC and Its Narrow Nanowires by Density Functional Theory [Volume 37, Issue 1, 2018, Pages 83-96]
  • Amoohadi, M. An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]
  • Arjmand, S. The Formation of Al3Ti Intermetallic compound at the junction interface of Titanium-Aluminum diffusional Coupling by Means of Diffusional Annealing Process [Volume 37, Issue 1, 2018, Pages 37-44]
  • Ashrafizadeh, F. Investigation of Adhesion and the Load Bearing of CrN-CrAlN Nanostructured Coating by Physical Vapor Deposition [Volume 37, Issue 2, 2018, Pages 81-93]
  • Askari, M. The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]

B

  • Baradaran, A. Investigation of the Optical Properties of GeO2-PbO-CaO-SrO Glass System in the Presence of Different Amounts of CaO and SrO [Volume 37, Issue 3, 2018, Pages 107-119]
  • Barounian, M. H. The Effect of Indomethacin on the Calcium Phosphate/polymer Light-Cured Nanobiocomposites ‎Behavior [Volume 37, Issue 1, 2018, Pages 45-54]
  • Bozorgmehr, M. The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]

C

  • Cheshmpish, A. The Effect of Al2O3 Particles Concentration on the Properties of Ni-Mo-Al2O3 Composite Coatings Fabricated by Electrodeposition [Volume 37, Issue 2, 2018, Pages 49-58]

D

  • Daneshvar e Asl, S. Two-Phase Rutile/Anatase TiO2 Nanoleafed Nanorod Arrays for Photoelectrochemical Applications [Volume 37, Issue 2, 2018, Pages 69-79]
  • Darvishi, S. Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
  • Dini, Gh. The Effect of pH and Duration of Hydrothermal Process on the Synthesis of Manganese Ferrite Nanoparticles [Volume 37, Issue 1, 2018, Pages 105-111]

E

  • Ebrahimian-Hosseinabadi, M. Modeling and Mechanical Analysis of Biphasic Calcium Phosphate/Silk Composite Bone Plate for Fractured Tibia Healing [Volume 37, Issue 2, 2018, Pages 59-67]
  • Ebrahimi far, H. Investigation of Isothermal and Cyclic Oxidation Behavior of Codeposited 430 Ferritic Stainless Steel with Aluminum and Titanium [Volume 37, Issue 3, 2018, Pages 13-23]
  • Emadi, R. Fabrication and Evaluation of the Mechanical and Bioactivity Properties of a Nano Structure-hardystonite Scaffold by the Space Holder Method [Volume 37, Issue 1, 2018, Pages 55-67]
  • Emami, N. Modification of Superhydrophilic, Anti-bacterial Polyurethane Polymer with TiO2 Nanoparticles for Medical Devices [Volume 37, Issue 4, 2019, Pages 73-89]
  • Emamy, M. Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium [Volume 37, Issue 4, 2019, Pages 1-11]
  • Enayati, M. H. Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying [Volume 37, Issue 1, 2018, Pages 1-9]
  • Erfan Niya, H. A study on the Adsorption of Graphene/Graphene Oxide–reinforced Polymer ‎Nanocomposites using Reactive Molecular Dynamics [Volume 37, Issue 3, 2018, Pages 25-47]
  • Eshaghi, A. Fabrication and Characterization of an Optical Nano-hybrid Sol-gel Derived Thin Film on the PMMA Substrate [Volume 37, Issue 4, 2019, Pages 101-112]

F

  • Falsafein, M. Investigation of Adhesion and the Load Bearing of CrN-CrAlN Nanostructured Coating by Physical Vapor Deposition [Volume 37, Issue 2, 2018, Pages 81-93]
  • Faraji, S. The Effect of pH and Duration of Hydrothermal Process on the Synthesis of Manganese Ferrite Nanoparticles [Volume 37, Issue 1, 2018, Pages 105-111]
  • Firoozi, S. The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]

G

  • Ghadiri, S. Synthesis and Characterization of Nanoporous Calcium Magnesium Silicate and Assessment of the Calcination Temperature Effect on Its Drug Delivery Behavior [Volume 37, Issue 1, 2018, Pages 69-82]
  • Ghanbari, M. The Effect of Boron and Zirconium on the Microstructure and Mechanical Properties of Cast Fe3Al-Based Alloys [Volume 37, Issue 4, 2019, Pages 43-57]
  • Gharaati, A. R. An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]
  • Ghasemi, A. The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]
  • Ghorbanzadeh, M. Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
  • Golestanifard, F. The Effect of Rheological Parameters on the Behavior of Silicon Nitride-Starch Slurry Used in Gelcasting Porous Silicon Nitride [Volume 37, Issue 4, 2019, Pages 13-23]

H

  • Habibi, A. Deposition of Diamond-like Carbon and Carbyne Thin Film by Cathodic Plasma Electrolysis Process [Volume 37, Issue 2, 2018, Pages 39-48]
  • Habibi, Negar The Effect of Catalyst and Water Content of the Hydrolysis Step on the Physical Properties of Silica Aerogel Dried at the Ambient Pressure [Volume 37, Issue 1, 2018, Pages 27-35]
  • Haghshenas Fatmesari, D. The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]
  • Haghshenas Gorgani, M. The Effect of Rheological Parameters on the Behavior of Silicon Nitride-Starch Slurry Used in Gelcasting Porous Silicon Nitride [Volume 37, Issue 4, 2019, Pages 13-23]
  • Hajfarajzadeh, M. Fabrication and Characterization of an Optical Nano-hybrid Sol-gel Derived Thin Film on the PMMA Substrate [Volume 37, Issue 4, 2019, Pages 101-112]
  • Hassanzadeh-Tabrizi, A. Synthesis and Characterization of Nanoporous Calcium Magnesium Silicate and Assessment of the Calcination Temperature Effect on Its Drug Delivery Behavior [Volume 37, Issue 1, 2018, Pages 69-82]
  • Hesaraki, S. The Effect of Indomethacin on the Calcium Phosphate/polymer Light-Cured Nanobiocomposites ‎Behavior [Volume 37, Issue 1, 2018, Pages 45-54]
  • Hosseinzadeh, M. The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]

J

  • Jarrahi, Z. The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling [Volume 37, Issue 4, 2019, Pages 59-72]

K

  • Karimi, Mahin The Effect of Catalyst and Water Content of the Hydrolysis Step on the Physical Properties of Silica Aerogel Dried at the Ambient Pressure [Volume 37, Issue 1, 2018, Pages 27-35]
  • Karimzadeh, F. Synthesis of Three-dimensional Graphene and Optimization of Its Morphology [Volume 37, Issue 2, 2018, Pages 1-12]
  • Kazemzadeh, A. The Effect of Indomethacin on the Calcium Phosphate/polymer Light-Cured Nanobiocomposites ‎Behavior [Volume 37, Issue 1, 2018, Pages 45-54]
  • Kharaziha, M. Synthesis of Three-dimensional Graphene and Optimization of Its Morphology [Volume 37, Issue 2, 2018, Pages 1-12]
  • Kharaziha, M. Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
  • Kharaziha, M. Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
  • Khosroshahi, Z. Synthesis of Three-dimensional Graphene and Optimization of Its Morphology [Volume 37, Issue 2, 2018, Pages 1-12]

L

  • Lashani Zand, M. Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]

M

  • Mahboubi, F. Deposition of Diamond-like Carbon and Carbyne Thin Film by Cathodic Plasma Electrolysis Process [Volume 37, Issue 2, 2018, Pages 39-48]
  • Mahdavi, S. A Comparative Investigation into Corrosion and Wear Properties of Zn-Ni and Zn-Ni/PTFE Coatings [Volume 37, Issue 3, 2018, Pages 49-62]
  • Mahmoudi Saleh Abad, M. Investigation of Isothermal and Cyclic Oxidation Behavior of Codeposited 430 Ferritic Stainless Steel with Aluminum and Titanium [Volume 37, Issue 3, 2018, Pages 13-23]
  • Maleki, A. Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
  • Minouei, H. Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying [Volume 37, Issue 1, 2018, Pages 1-9]
  • Mirdamadi, Sh. Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
  • Mirkazemi, M. The Effect of Rheological Parameters on the Behavior of Silicon Nitride-Starch Slurry Used in Gelcasting Porous Silicon Nitride [Volume 37, Issue 4, 2019, Pages 13-23]
  • Mirzaaei ghasabe, H. Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
  • Mirzadeh, H. Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium [Volume 37, Issue 4, 2019, Pages 1-11]
  • Mohammadpour, V. Investigating the Effect of Ethanol and Ascorbic Acid on Titanium Dioxide Extraction from Ilmenite by Oxalic Acid [Volume 37, Issue 1, 2018, Pages 11-25]
  • Moradpour, E. An Investigation Into the Properties of MoS2-Cr Coatings Produced by DC Magnetron Sputtering [Volume 37, Issue 4, 2019, Pages 25-41]
  • Mousavi Khoie, S.M. Deposition of Diamond-like Carbon and Carbyne Thin Film by Cathodic Plasma Electrolysis Process [Volume 37, Issue 2, 2018, Pages 39-48]
  • Mozaffari, M. An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]

N

  • Nadimi, H. The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]
  • Nemati, Sh. Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
  • Niroumand, B. Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
  • Niroumand, B. Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
  • Noorisafa, F. Modification of Superhydrophilic, Anti-bacterial Polyurethane Polymer with TiO2 Nanoparticles for Medical Devices [Volume 37, Issue 4, 2019, Pages 73-89]
  • Nourmohammadi, J. Structural and Mechanical Evaluation of Polycaprolactone Scaffold with the Gradient Porous Microstructure for Bone Tissue Engineering [Volume 37, Issue 3, 2018, Pages 75-86]

P

  • Panahi Moghadam, A. The Effect of Mg on Microstructure and High Temperature Mechanical Properties of Hasteloy X Superalloy [Volume 37, Issue 2, 2018, Pages 29-37]
  • Pishevarz, G. A study on the Adsorption of Graphene/Graphene Oxide–reinforced Polymer ‎Nanocomposites using Reactive Molecular Dynamics [Volume 37, Issue 3, 2018, Pages 25-47]
  • Pourabdoli, M. The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling [Volume 37, Issue 4, 2019, Pages 59-72]
  • Pourbahari, B. Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium [Volume 37, Issue 4, 2019, Pages 1-11]

R

  • Rajabi, M. The Effect of Boron and Zirconium on the Microstructure and Mechanical Properties of Cast Fe3Al-Based Alloys [Volume 37, Issue 4, 2019, Pages 43-57]
  • Raygan, Sh. The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling [Volume 37, Issue 4, 2019, Pages 59-72]
  • Razmjou, A. Modification of Superhydrophilic, Anti-bacterial Polyurethane Polymer with TiO2 Nanoparticles for Medical Devices [Volume 37, Issue 4, 2019, Pages 73-89]
  • Rezazadeh, M. An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]

S

  • Sadeghzade, S. Fabrication and Evaluation of the Mechanical and Bioactivity Properties of a Nano Structure-hardystonite Scaffold by the Space Holder Method [Volume 37, Issue 1, 2018, Pages 55-67]
  • Sadrnezhaad, S. Kh. Two-Phase Rutile/Anatase TiO2 Nanoleafed Nanorod Arrays for Photoelectrochemical Applications [Volume 37, Issue 2, 2018, Pages 69-79]
  • Salehi, H. First Principeles Initio Study of the Electronic and Optical Properties of Bulk TiC and Its Narrow Nanowires by Density Functional Theory [Volume 37, Issue 1, 2018, Pages 83-96]
  • Seifollahi, M. The Effect of Mg on Microstructure and High Temperature Mechanical Properties of Hasteloy X Superalloy [Volume 37, Issue 2, 2018, Pages 29-37]
  • Shahmiri, M. The Effect of Boron and Zirconium on the Microstructure and Mechanical Properties of Cast Fe3Al-Based Alloys [Volume 37, Issue 4, 2019, Pages 43-57]
  • Shams, S. F. Modeling and Mechanical Analysis of Biphasic Calcium Phosphate/Silk Composite Bone Plate for Fractured Tibia Healing [Volume 37, Issue 2, 2018, Pages 59-67]
  • Soltanieh, M. Investigating the Effect of Ethanol and Ascorbic Acid on Titanium Dioxide Extraction from Ilmenite by Oxalic Acid [Volume 37, Issue 1, 2018, Pages 11-25]

T

  • Tafreshi, M. A Comparative Investigation into Corrosion and Wear Properties of Zn-Ni and Zn-Ni/PTFE Coatings [Volume 37, Issue 3, 2018, Pages 49-62]
  • Talebi, Z. The Effect of Catalyst and Water Content of the Hydrolysis Step on the Physical Properties of Silica Aerogel Dried at the Ambient Pressure [Volume 37, Issue 1, 2018, Pages 27-35]
  • Tavakoli dehaghi, Sh. Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
  • Tavoosi, M. The Formation of Al3Ti Intermetallic compound at the junction interface of Titanium-Aluminum diffusional Coupling by Means of Diffusional Annealing Process [Volume 37, Issue 1, 2018, Pages 37-44]
  • Tavoosi, M. Investigation of the Optical Properties of GeO2-PbO-CaO-SrO Glass System in the Presence of Different Amounts of CaO and SrO [Volume 37, Issue 3, 2018, Pages 107-119]

V

  • Vahedi, A. The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]

Z

  • Zahraei, M. The Effect of pH and Duration of Hydrothermal Process on the Synthesis of Manganese Ferrite Nanoparticles [Volume 37, Issue 1, 2018, Pages 105-111]
  • Zakeri, A. Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
  • Zaminpayma, E. A study on the Adsorption of Graphene/Graphene Oxide–reinforced Polymer ‎Nanocomposites using Reactive Molecular Dynamics [Volume 37, Issue 3, 2018, Pages 25-47]
  • Zandrahimi, M. Investigation of Isothermal and Cyclic Oxidation Behavior of Codeposited 430 Ferritic Stainless Steel with Aluminum and Titanium [Volume 37, Issue 3, 2018, Pages 13-23]
  • Zandrahimi, M. An Investigation Into the Properties of MoS2-Cr Coatings Produced by DC Magnetron Sputtering [Volume 37, Issue 4, 2019, Pages 25-41]

ارتقاء امنیت وب با وف ایرانی